How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of unique steps to add an additional ignition key. This requires the use of a handheld computer, known as Tech-2, to be used by the dealer. Then a new key as well as transponder must be purchased and then programmed to the car.
It is an excellent idea to rotate your keys so that one does not get damaged faster than the other. This will keep your keys in pristine condition.
Replacement Case
Contrary to the classic Saab keys of old keys, the modern key fobs are equipped with electronics which makes it difficult to make a copy. This has made theft of cars significantly more difficult than it was a few years ago. However, it also has made replacing lost keys a much more expensive undertaking.
Saab 9-3 owners must have two keys that work. It is costly to replace a lost key because it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers usually charge between $100 and $200 to complete this.
There are options to avoid these costly costs. Certain parts suppliers will utilize the code of the spare key to cut a new metal blade for less than that of a dealer. The key must be the exact identical to the original one for it to function in your vehicle.
Follow these steps to replace the case. You'll require an flathead screwdriver and patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. Once the case is open, remove the electronic components and put them back into your new case. Be sure to put the correct badge and key back inside the case, too.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced quickly and easily. This YouTube DIY video Cyclone Cyd shows how to replace the battery of the remote key fob in just four steps. This guide should work with any modern saab key fob, however the procedure might differ slightly.
The first step is to locate the button that will release the backup key on the fob. This button is usually located close to the Saab logo on the back of the fob. Then, use the flathead screwdriver to insert into the small hole in this button. This should be sufficient to allow you to open the fob case so that you can change the battery.
Once the new CR1632 battery is installed then you can reassemble your remote key fob, and then program it to your car. The entire process shouldn't take more than an hour. It's a simple process that doesn't require any special tools.
The process is a bit more complicated if you've lost your key, but it's possible. The dealer must read the car's VIN and then order a new key blade and TWICE module that has the proper unique code. Then, they'll need to cut the replacement key and then program it using a new software tool called MDI.
Replacement Key Fob
The key fob has a battery that is used to lock and unlock your vehicle. Batteries are able to last for a short time and will eventually die. It is a common problem in all vehicles. The good news is that you can replace the battery in all key fobs, and not have to replace the entire case. Amazon sells replacement fobs with all the electronic components installed. It is easy to pop the case open and replace the batteries. It is important to note that you will need to take out the emergency key first. you can accomplish this by inserting a small flathead screwdriver into the slot in the middle of the case. The case will split once you turn the screwdriver around it.
If you're ready to replace your keys, have a spare on hand. www.g28carkeys.co.uk can save you a lot of money. If you have spare keys, you can request that the dealer cut an additional key and program it into your car, which is cheaper than replacing the entire key fob.
If you don't have a spare you can add another key to your car, but this requires a lot research and effort. Adding a second key costs a few hundred dollars, and it also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.
Replacement Ignition
The new SAAB 9-3 uses an advanced alarm system based on a key code. If you lose only one key, it could be expensive to add another one, as the car has to have a specific computer installed and also be programmed to accept a new key. The majority of locksmiths aren't able to do this and dealers can charge several hundreds of dollars just to program the new key!
Dealers will charge you the highest price to replace your car computer (also called the CIM or SAAB twice) in the event that you lose your only working key. Instead, we can reprogram the EEPROM on your existing car computer, preparing it for a replacement key, slashing over 50% of the price you spend at a dealer.
If you've owned a SAAB 9-3 many years you are aware that the ignition keys are not very durable. If the ignition key you have isn't functioning properly, it is time to look into replacing it. They can become sticky and the buttons can fall off. The good news is that replacing the ignition key isn't as difficult as it sounds, and it is fairly easy to do using the appropriate tools.